Guides & Notes from a Boise Cabinet Shop

Practical guides on custom cabinetry, kitchen remodeling, materials, and design from 3D Cabinetry & Custom Renovations — written for homeowners who want straight answers before they spend real money.

• CNC-Slotted Millwork Panels: 7 Details to Settle Before Cutting
  What architects, GCs and millwork shops should specify before CNC-routing slotted panels: material, slot geometry, support, open area, tooling and finish.
  Architectural Millwork · October 16, 2026 · 12 min read
• Commercial Casework Edgebanding: What Actually Determines a Clean, Durable Edge
  A shop guide to commercial casework edgebanding: panel preparation, adhesive, pressure, trimming, material matching and inspection before assembly.
  Commercial Casework · October 8, 2026 · 10 min read
• Commercial Break Room Casework: 8 Coordination Details to Lock Before Fabrication
  Coordinate commercial break room casework before fabrication: field dimensions, MEP, appliances, backing, accessibility, countertops and clearances.
  Commercial Casework · October 5, 2026 · 9 min read
• CNC Nesting for Cabinet Parts: How We Sequence Cuts to Reduce Waste and Rework
  How an owner-led Boise cabinet shop sequences a nested CNC run — grain orientation, toolpath grouping, tabbing, vacuum hold-down zones, and the mistakes that turn an efficient nest into scrapped parts.
  In the Shop · August 25, 2026 · 6 min read
• Tying New Framed Walls Into an Existing Suspended Ceiling Grid: What We Learned on a Commercial Build-Out
  How to frame new interior walls into an existing suspended ceiling grid without redoing work — sequencing, budget line items, and lessons from a commercial tenant improvement in Boise.
  Commercial · August 16, 2026 · 6 min read
• 7 Cabinet Storage Decisions to Make Before You Remodel Your Kitchen
  Boise homeowners planning a kitchen remodel should make these seven cabinet storage decisions before their cabinets are designed and built.
  Kitchen Design · August 11, 2026 · 6 min read
• Restoring Historic Exterior Trim on a Deferred-Maintenance Building: Matching Original Profiles
  How we replaced rotted exterior fascia, crown, and entrance moulding on a state-owned deferred-maintenance building in Boise — material selection, profile matching, and working as a trim sub under a GC on a public works contract.
  Commercial · August 3, 2026 · 7 min read
• Kitchen Remodel Cost Breakdown: What Boise Homeowners Are Actually Paying For
  A practical kitchen remodel cost breakdown for Boise homeowners, including cabinets, counters, labor, layout changes, finish choices, and budget planning.
  Remodeling · August 2, 2026 · 8 min read
• From Sheet Goods to Your Kitchen: How Custom Cabinets Are Actually Built in Our Boise Shop
  A look inside an owner-led custom cabinet shop in Boise, Idaho — how cabinets go from raw plywood to CNC-cut parts to finished, installed kitchens.
  In the Shop · July 6, 2026 · 6 min read
• Cabinet Door Styles, Explained: Shaker, Slab, Inset, and What's Working in Boise Kitchens Right Now
  A working guide to cabinet door styles from a Boise custom shop — shaker vs. slab, inset vs. overlay, painted vs. stained, and the combinations showing up in Treasure Valley kitchens.
  Design · July 1, 2026 · 7 min read
• Plywood vs. Melamine Cabinet Boxes: Why We Build Melamine as Our Standard
  A Treasure Valley cabinet maker breaks down plywood and melamine (particleboard) cabinet boxes — durability, moisture, cost, and appearance — and explains why melamine is our default recommendation for most kitchens.
  Materials · June 22, 2026 · 6 min read
• What a Full Kitchen Remodel Actually Involves — A Week-by-Week Walkthrough
  A Boise cabinet shop walks through every phase of a full kitchen remodel, from design to final walkthrough — what happens each week, what it costs, and what can go sideways.
  Remodeling · June 8, 2026 · 8 min read